313 Low-Profile Microwave Detector
313 Low-Profile Microwave Detector Datasheet
The 313 Low-Profile Microwave Detector provides occupancy detection for the automatic control of DALI lighting loads.
The unit detects movement using its highly sensitive microwave detector. It emits low-power microwave signals, and measures the reflections as the signals bounce off moving objects.
When an area is no longer occupied, the load will switch off after a certain time. This time-out period is configured using Helvar’s lighting system design and control software: Designer, or Toolbox. It can also be controlled using a Helvar infrared remote handset.
The unit can be mounted into a ceiling or wall void, or onto a solid surface using Helvar’s SBB-A or SBB-AB back boxes (available separately).
From hardware revision 4, the Low-Profile Microwave Detector can be used with a Helvar 401, 402 or 403 or a generic 12 V to 24 V power supply unit.
Key Features
Detects movement within the detection range allowing load control in response to changes in room occupancy.
Receives control and programming commands from a Helvar infrared remote handset (available separately).
The red LED flashes to indicate the following:
Technical Data
Connections
|
External power / DALI:
|
Removable terminal blockWire section: 0.5 mm² – 2.5 mm²solid or stranded
|
Cable rating:
|
All cables must be mains rated.
|
Power
|
DALI supply input:
|
13 V to 22.5 V
|
DALI consumption:
|
20 mANote: DALI consumption is less than 2 mA when external power is supplied to the unit.
|
(Optional) External power:
|
12 V to 24 V; 0.3 W
|
Remote control functions
|
Use Helvar infrared remote handset to:
|
– Recall lighting scenes 1–4.– Adjust light levels.– Store current level.– Install preset levels for scenes 1–4.Note: Adjust sensitivity using Designer, or Toolbox (not by remote control unit).Factory setting for sensor sensitivity: 9 (maximum).
|
Microwave operating frequency
|
Frequency:
|
5.8 GHz
|
Mechanical data
|
Mounting hole diameter:
|
68 mm
|
Bezel diameter:
|
76 mm
|
Recommended clearance depth (incl. 50 mm for cabling):
|
80 mm (without protective cover)100 mm (with protective cover)
|
Material (casing):
|
Flame retardant ABS and PC/ABS
|
Finish/Colour:
|
Matt / White RAL 9003
|
Weight:
|
90 g
|
IP code:
|
IP30
|
Operating conditions
|
Ambient temperature:
|
0 °C to +50 °C
|
Relative humidity:
|
Max. 90 %, noncondensing
|
Storage temperature:
|
−10 °C to +70 °C
|
Conformity and standards
|
EMC emission:
|
EN 61000-6-1
|
EMC immunity:
|
EN 61000-6-3
|
Safety:
|
EN 60730-1
|
Environment:
|
Complies with WEEE and RoHS directives.
|
Version information
|
Software version:
|
6
|
Hardware version:
|
Rev. 4
|
Software compatibility
|
Designer:
|
4.1 or later
|
Toolbox:
|
2.2.16 or later
|